LG washing machine hall sensor repair

Fixing a lg washing machine with LE error code. Three of those four 681 (680ohm) smd resistors where burn. After measuring the dimensions, I think those smd resistors are 1/8w.

 

I desolder them and order a 1/4w resistor kit on ebay. I twisted the legs of two 680ohm resistors together and solder them on the smd pads on the board.

 

I could just have used one 330 ohm resistors because the smd components where in parallel. But the resistors I have are 1/4 so two 680ohm will dissipate better the power (1/2w)

 

I think with the original setup it was 1/4w so it's an upgrade.

And not Pb free anymore.

 

Done