zndyess
Clone Pilot Swoop
Black Undersuit
One or two piece black undersuit. Commonly used components include sports compression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on.
Black Gloves
Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
Neck Seal
Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.
Helmet
The Clone Wars animated style clone pilot helmet – Fanmade bucket. Some “name brand” helmets may be unacceptable.
Visor – Black visor covers entire “T” shape and frown
4 black vents on each side of helmet.
2 blue flowers on each side of dome
Blue mohawk and brow
2 blue lines extend down from brow and extend to towards the center of visor.
Blue ring that wraps around the base of helmet stopping just before the helmet frown
Medium grey stripe around back of dome.
2 medium grey indents on the back of dome
2 medium grey canisters matching the indents on the back of helmet.
2 black hoses run from the helmet canisters to the chest box
NOTE: Episode II style helmets are not acceptable
Chest Box
Attaches to chest via magnets or some other form.
White with details to match the resource images.
2 Hoses attached to the chest box and run to the canisters on the back of helmet.
Armor
Chest – Chest and back plate should match together at the sides with no gap, just a seam line.
Back – Chest and back plate should match together at the sides with no gap, just a seam line.
Shoulders
Shoulder Straps – Correct shape with ridges.
Upper Arms – Front/back pieces are seamless.
Forearms- Inner seam/clamshell design allowed.
Hand plates
AB plate
Kidney/Lower Back Piece
Butt Plate
Cod piece
Upper thighs – Front/back pieces are seamless.
Lower Legs
Compad on left forearm
Clone Trooper boots
White shoes with white soles
Strap across top of foot with circular detail pieces at each end
Proper toe detail
No laces or logos
Belt
The Clone Wars style belt
Segmented (or segmented-look) belt
One large belt box, opposite each other, on hips
Thermal detonator centered on rear of belt
Optional
Elements listed as acceptable here may not be traditionally associated with a costume, but are not so unreasonable as to detract from it. Please keep in mind that the following items may not be allowed at certain canon/high profile appearances.
DC-15 Short
DC-15 Long Rifle
DC-17 Hand blaster
Other weapons used by clones in The Clone Wars are acceptable.
Weathering – HIGHLY RECOMMENDED Color should be heavy on the greys, with little/no browns
Clone Pilot Swoop
Black Undersuit
One or two piece black undersuit. Commonly used components include sports compression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on.
Black Gloves
Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
Neck Seal
Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.
Helmet
The Clone Wars animated style clone pilot helmet – Fanmade bucket. Some “name brand” helmets may be unacceptable.
Visor – Black visor covers entire “T” shape and frown
4 black vents on each side of helmet.
2 blue flowers on each side of dome
Blue mohawk and brow
2 blue lines extend down from brow and extend to towards the center of visor.
Blue ring that wraps around the base of helmet stopping just before the helmet frown
Medium grey stripe around back of dome.
2 medium grey indents on the back of dome
2 medium grey canisters matching the indents on the back of helmet.
2 black hoses run from the helmet canisters to the chest box
NOTE: Episode II style helmets are not acceptable
Chest Box
Attaches to chest via magnets or some other form.
White with details to match the resource images.
2 Hoses attached to the chest box and run to the canisters on the back of helmet.
Armor
Chest – Chest and back plate should match together at the sides with no gap, just a seam line.
Back – Chest and back plate should match together at the sides with no gap, just a seam line.
Shoulders
Shoulder Straps – Correct shape with ridges.
Upper Arms – Front/back pieces are seamless.
Forearms- Inner seam/clamshell design allowed.
Hand plates
AB plate
Kidney/Lower Back Piece
Butt Plate
Cod piece
Upper thighs – Front/back pieces are seamless.
Lower Legs
Compad on left forearm
Clone Trooper boots
White shoes with white soles
Strap across top of foot with circular detail pieces at each end
Proper toe detail
No laces or logos
Belt
The Clone Wars style belt
Segmented (or segmented-look) belt
One large belt box, opposite each other, on hips
Thermal detonator centered on rear of belt
Optional
Elements listed as acceptable here may not be traditionally associated with a costume, but are not so unreasonable as to detract from it. Please keep in mind that the following items may not be allowed at certain canon/high profile appearances.
DC-15 Short
DC-15 Long Rifle
DC-17 Hand blaster
Other weapons used by clones in The Clone Wars are acceptable.
Weathering – HIGHLY RECOMMENDED Color should be heavy on the greys, with little/no browns