View allAll Photos Tagged modulation,
SMS303's Ultra Rare Dutch
Tidal Quad Modular Filter
Only 15-20 are build
The Tidal Quad is a 4-channel filterbank with extensive control and modulation possibilities. The filter can be used in High-/ Low-/ or Bandpass with an Envelope follower for each mode. There is also an LFO for each set of 2 Channels which allows complex modulations. Additionally it offers a Waveshaper for each channel. For friends of analog distortion this unit leaves no wish open.
* 4x HP/BP/LP - Filtermodule
* LFO Channel 1+2 (Cutoff)
* LFO Channel 3+4 (Cutoff)
* LFO each channel positive or negative switch
* 1 Waveshaper per Channel
* 4x Sidechain Input with Envelope Follower for Cutoff-Modulation
The resonant filter might be the most important effect in popular music these days. However if you want to insert a filter on multiple channels of your mixer and also would like to have a lot of knobs and modulation possibilities, there was no real solution. That's why Tidal Music Electronics announces it's four channel desktop multimode filter. You can switch the four individual resonant filters between Lowpass, Bandpass and Highpass modus. Each filter can be modulated by an envelope follower, a LFO and an external CV. The envelope follower is specially designed to track percussive sounds without false triggering, a key feature when used with drumcomputers, grooveboxes or guitar.
Maximum Modulation:
Each filterbank has 4 VCFs, 4 Waveshapers, 4 Envelopefollowers and 2 Low Frequency Oscillators (LFOs). The filters are switchable between 3 modes, Lowpass, Bandpass and Highpass. The Low- and Bandpass are 24 dB and the Highpass is 12 dB/Oct. The cutoff of each channel can be modulated by it's own Envelope follower which can be fed by a sidechain input or by the audiosignal itself. This option gives you the possibilities to create very funky filter-effects. Each LFO modulates 2 channels and every channel has it's own depth controller which can be set positive or negative. This can be used to generate cool stereo effects.
The Waveshaper
The waveshaper is one of the components which give the filterbank it's unique sound. It actually is a wavefolder which "folds" the tops of the waveform back instead of clipping. This sounds a bit like an overdrive but also has some characteristics of Frequency Modulation.
To give you a better idea what the waveshaper actually does we'll illustrate what happens with a simple sine wave using different ratio settings for each of the two shaper modes.
Just arrived, Turner Super Sidekick. To replace my 30 year old Turner +3B.
Forget studio mikes, parametric and graphic equalizers or special (Heil) elements.
This is the only mike that gives true BBC quality modulation.
Interesting: www.ericbraun.com/turner/
Stafford Air & Space Museum
The Apollo survival kit provided 48 hours of survival supplies for the three-man crew. Displayed are the contents of one of two rucksacks.
Radio Beacon
The survival radio was a hand-held, dry-cell-battery-powered, electronic signal and voice communications device. The radio could be operated within the SC by using a connector cable to the SC antenna. A constant emergency-signal and voice-contact device was required to aid rescue teams if postlanding recovery was delayed. Voice reception increased from approximately 30 to 120 miles. Voice modulation improved and radio weight was reduced from 6 pounds to 4 pounds. Beacon range reception also increased to 120 nautical miles, for search aircraft operating at 10,000 feet.
Survival Blanket
Three pieces of nylon-Mylar material that are 60 by 42 inches are provided for the Apollo missions. The material could be used for thermal protection and for signal purposes.
Water Containers
Three water containers were included in the Apollo survival kit. A 1/4-inch-radius indention forming an "X" on each of the two largest sides of the water containers solved a deflection problem which occurred because of pressure differential. A few crewmen also stated that the aluminum caused the water to have an undesirable taste.
JW4103 optic talk setwith Red Light Source 60KM
Description
JW4103 Optical Talk Set is an intelligent and efficient instrument that combines in one set the functions of both a digital optical phone and a stabilized light source. It is widely used in operations of installation, optical testing, maintenance and fiber attenuation value testing in data network, CATV and Telecommunication network. The JW4103 Talk Set can carry out full-duplex communication with high quality connection and not be affected by distance.
Features:
Full-duplex digital communication with high quality conversation connection and low background noise
Together with Optical Clip-on Coupler, enables on line communications available
Combining functions of both a digital optical phone call and a stabilized light source
Large LCD display with backlight
Low battery power indication
Applications:
Maintenance in Telecom
Maintenance CATV
Test Lab of optical fibers
Other Fiber Optic Measurements
Specification:
Type
JW4103
Wavelength(nm)
1310/1550
Emitter Type
FP-LD
Transmission Distance
≥ 80km
Dynamic Range
40dB
Output Power
-5~-7dBm(9/125um), CW or 2KHz, 1KHz, 270Hz Modulation
Output Stabvlity
± 0.1dB/± 0.25dB(1/8hrs) CW
Power Supply
Rechargeable Battery + Power Supply Adaptor
Battery Operating Time
5 hours
Optical Connector
FC/PC
Operating Temperatrue(C)
-10 ~ +60
Storage Temperatrue(C)
-25 ~ +70
Dimension(mm)
215X115X55
Find Your Inspiration - Joseph
Every year, Joseph’s arrival was highly anticipated. He’s been a part of our gang every summer since he, Aviva, Zoe, and I met at the Spirit of the Mountains Camp 13 years ago. He’s allowed us to dress him up with feather boas and pig tails, he’s been on years of adventures with us singing loud, out of tune Disney songs (and just as enthusiastically joining in, but without the modulations). He's groggily answered 3 am phone calls about college essays and life questions. He has been there without fail since our first summer together. And since then he has always been a source of inspiration. This is because Joseph has an incredible power to give people hope. Before you stop reading because of how cliche that sentence sounded, let me explain: Do you ever put your headphones in, or turn up the volume of a song, because it evokes that indescribable emotion that you can't quite find anywhere else? It fills you up and makes the world that much more beautiful. That feeling is one of the reasons why music has remained such a large part of my life. It is the soundtrack I play in the back of my mind for every important, cheesy, and cliche moment. It’s the sound of my cowboy hat wearing dad playing Happy Trails as the flames of a camp fire start to die down. And since that first year of camp, Joseph has helped to make that sound. The other night, as we all sat in my living room passing around my father's guitar, Joseph added an inescapable beauty to the room. He squinted at Fleet Fox lyrics through Zoe’s broken iPod screen, harmonizing with her effortlessly while we loudly talked to him and each other. Joseph gives me the kind of hope and happiness that I find in music. I know this paragraph barely explains what he means to me, and I know I will never be able to thank him for this.
What I do know is that you will always be a part of my picture, Joseph.
Networked Fabrication for Urban Provocations.
Shifting Paradigms from Mass Production to Mass Customization
Computational architecture and design course
Conventional construction methods all depart from the basic premises of mass production: standardization, modulation and a production line. What these systems developed during the last two centuries fail to take into account are the evolutionary leaps and bounds the manufacturing industry has taken over the last decades. With the introduction of CNC technologies and rapid prototyping machines have altered the paradigms of fabrication forever. It is due to these new tools that it is now possible to create (n) amount of completely unique and different pieces with the same amount of energy and material that is required to create (n) identical pieces. The possibilities for implementation of new forms, textures, materials and languages are infinite due to the versatility that these new tools offer a growing network of architects, designers, fabricators that are integrating them into their professional practices to generate unique and precise objects that respond to countless data and real-life conditions.
Instructors:
Monika Wittig [ LaN, IaaC ]
Shane Salisbury [ LaN, IaaC ]
Filippo Moroni [ SOLIDO, Politecnico di Milano ]
MS Josh Updyke [ Advanced Manufacturing Institute, KSU, Protei ]
Aaron Gutiérrez Cortes [ Amorphica ]
Communication plays a vital role in our day-to-day life. Regardless of a student’s ultimate area of specialization, knowledge of communications concepts and applications is no longer optional, it is essential to understand today’s multidisciplinary applications.
This book is primarily intended to serve as a text book in accordance with the syllabus of digital communication systems, offered by Rajasthan Technical University, Kota. In this a significant effort has been made to find simple ways to develop theoretical aspects of digital communication systems. A strong emphasis has been given on numerical problems and objective questions.
In this covers the mathematical background, Pulse code modulation including DPCM and Delta modulation, Baseband signal Transmission, Digital modulation techniques, etc.
Authors: Tara Birla, Jyoti Sharma.
Microscopy 400x Hoffman Modulation Contrast. From a salt marsh pond in Heron's Head Park, San Francisco Bay.
After almost eighteen years of deceptive silence, Brazen is back with Distance, an ambitious indie-rock epic where melancholic modulations and vocal harmonies intertwine on a soaring instrumental carpet. The eight tracks that make up the album are characterised by refined songwriting, carried by an epic breath that makes each track a journey in its own right. Composed, arranged and recorded remotely between London and Geneva over the course of almost a decade, the album is as musically polished as it is rich in narrative twists. The meticulous care taken in its conception gives it a timeless character that in no way detracts from its emotional intensity.
Static
a. inactive, not in physical motion
b. of or relating to bodies at rest or forces in equilibrium
c. a crackling or hissing noise caused by electrical interference
Pulse
a. rhythmical beating, vibrating, or sounding
b. a transient variation of a quantity whose value is normally constant
c. an electromagnetic wave or modulation thereof of brief duration
Shot in Tokyo with Canon 350D and 5D DSLRs, processed with Lightroom (raw files color adjustment and resizing)/VirtualDub (deshaker/deflicker filters)/Sony Vegas (editing). Original rendered in full 1080 HD@30p.
Music : Edge to Life by Recoil on "Bloodline", one of my favorite albums ever. Available from all major music outlets.
All rights reserved to their respective owners.
This is a frame from a video. You can watch it on Vimeo.
Here's some spec's on this sweet system. It's a "Matrix" system, meaning that it has the ability to change all of it's routings on every preset.
Instead of being tied to one signal flow you can have any signal flow you want, when you want. Which is pretty handy for score music composer & guitar instrumental musician who has to constantly change the signal flow.
The switcher has a software interface that allows you to create an icon for each device and it's corresponding input(s) & Output(s), then using the mouse, connect the rig you want to have at that moment with no extra devices connected to the signal path for the cleanest path possible from pick ups to speakers.
A matrix switcher has 16x Inputs & 16x Outputs, so we decided to put 5 switchers in this system, connected them to each other & bunch of other cool gear. Each switcher has a "Group" responsibility:
1. "Master" - Magnetic & Piezo Inputs + 4x Amplifiers + 1 Axe FX ("Front End" of 4 Wire Config) + Multiple Connections to the other Switchers
2. "Harmonics" - Octave, Fuzz & Overdrive devices.
3. "Dynamics" - Compressors, EQ's Filters, Synthesizers.
4. "Modulations" - Chorus, Phaser, Flanger, UniVibe, & Tremolo.
5. "Time" - Delays & Reverbs + Axe FX ("Back End") for Reverb, Delay & Looper.
Any order & combination of series & parallel is possible, the possibilities for signal routings are only limited by the player's imagination...
A Spanish Airforce McDonnell Douglas AV-8B Harrier II in a full hover. First entered service in 1973, and still being used by the Spanish and Italians
Species of Melosira from the salt pond site NS-1 in Heron's Head Park, San Francisco, on San Francisco Bay. This was taken with Hoffman Modulation Contrast Optics at 1,000x, from a wet mount slide. This shows the barrel structure of a single cell of this colonial diatom.
My first QSL card from outside the United States. Hector lives in Cienfuegos, Cuba, 1149 miles from my location in Louisville, Kentucky.
QSO: www.flickr.com/photos/jmschneid/8556896541
Current callsign is KB4BB
Fully programmable, analog synthesis for all players; monologue is the next-generation monophonic synthesizer that shares the spirit of the acclaimed minilogue, with a completely new voice and powerful new features.
The monologue is a 25-key, fully programmable monophonic analog synthesizer with a voice all its own. While sharing its sleek layout, knob-per-function workflow and high-quality construction with the best-selling minilogue, monologue is a truly unique new synth for all types of musicians; featuring new voicing and sound sculpting abilities – at an amazing price. The monologue's completely new filter, modulation, drive, and LFO can generate powerful basses and sharp leads, creating awesome mono sounds that showcase its single-voice design. The step sequencer has also been dramatically expanded, allowing more intuitive and more complex editing. With a lineup that gives you a choice of five eye-catching colors, this compact instrument has a strong personality to match your own.
Manchester Cathedral.
St Mary Window, 1980.
By Antony Hollaway (1928-2000).
In 1963 the stained glass designer and craftsman Tony Hollaway was introduced to the Manchester architect, Harry Fairhurst. Eight years later, after they had worked together on commissions in Cheshire and Liverpool, Fairhurst sought Tony's advice about a plan for five large stained-glass windows in Manchester Cathedral.
Thus was Tony asked to design and make the first window, the St George in the inner south-west aisle. It was completed in 1973. Further windows followed in 1976 and 1980 and the final window, Revelation was installed in 1995.
Detail: The St Mary Window. Designed by Antony Hollaway, 1980. (This is in the Tower.)
The circle, which dominates the window, is the ancient Christian symbol of perfection. It is marred by the death of Jesus in the form of a shart of leight or the sword. This is a direct reference to the prohecy of Simeon to the Blessed Virgin at the time of the Presentation of Jesus in the Temple. (“A sword shall piee through your own Soul also”. Luke 2: 35).
This destoryed the perfection of the circle which is compensated for visually the the arcs of red and yellow. “And there appeared a great wonder in Heaven: a women clother with the sun, the moon under her feet …” (Revelation 12:1). These radii restore the symmetry required for formal and design purposes.
These are seven shades of blue within the circle, blue being a colour traditionally associated with St Mary the Virgin. The circle contains a serpent. This is a multiple image best understood under the following headings:
The circle placed upon these blocks of colour are letter forms both upper and lower case which are essentially to create a pattern. However, they may be re-assembled to read verses from the Magnificate: left to right. The act of re-assembling the letters is intended to concentrate the mine on the text which would not necessarily result from ‘easy reading’.
The above details are intended to present:
1. A suitable light modulation for this part of the building.
2. A relationship with the two adjoining windows.
3. A monumentality and dignity appropriate to the Architecture and to the special place of this window in the Scheme, and of the Virgin Mary among the Patron Saints of the Cathedral.
All the teaching elements of the window are subordinate to the formal design requirements expressed in (3).
Attack, Decay, Sustain, Release envelope generated by direct PWM synthesis on an Arduino. The envelope is pre-computed using a small C program on a Linux machine, then stored in 256 bytes of Flash memory (ROM) in the Arduino's processor.
In the real-time sound installation "leaky insulation", the perception of the surrounding space is modulated by rhythmical waves of presence and absence of sound. Ambient sounds are captured by a microphone and the signal is passed through a microcontroller programmed to modulate the signal amplitude with a slow sine wave function. Headphones are employed as a permeable interface through which to encounter the filtered soundscape.
By inviting viewers to listen to ambient sounds through a cyclical modulation, connecting and disconnecting the listener from the soundscape, the work heightens awareness for rhythmicity in the environment, offering a window into synchronous and asynchronous events.
This exhibition was created as part of a PhD study.
Photo: Marta Beauchamp
my intention with this photo was the show the beautiful tones that this super colorful image had, it was a huge mural and I tried to photograph it for what I saw
I think I did a great job with capturing the lines and shapes and great tones
For editing: I did some cleaning up. Sharpened and used noise reduction. Added black and white layer and Tuned to my liking in acr. and cropped
My reference is that duchemin said that Pulling the color from a scene allows the texture and tones to play in a stronger way than they do with the color present. he also said.
"Sure, you lose some of the mood but there’s a give and take in each decision. Knowing which to use, and when, comes as we learn to see in both color and black and white."
and freeman also said "Removing the quality of color from an image enhances its other qualities. With the modulation entirely in tone, the eye pays more attention to texture, line, and shape."
I used this for all my photos I tried to really focus of lines and texture as well as the tones and shapes.
ASM Hydrasynth Desktop
The HYDRASYNTH Desktop / Rack has the same great sound engine as the HYDRASYNTH Keyboard. The sound engine is a sound designers dream synth as well as a performing musicians ideal. The sound engine is designed for maximum flexibility. At the same time, we designed the user interface in a way to allow you to edit the patch quickly with a minimal amount of paging and many workflow shortcuts.
Utilizing an advanced wavetable synthesis engine, 3 Oscillators, dual Wave Mutators and 2 filters that can be configured in series or parallel, the tone generating capabilities are unmatched.
As for the performance capabilities, The Hydrasynth Desktop / Rack has 24 polyphonic pressure touch pads so that you can play the unit without needing to connect a keyboard or other controller. Using multiple pad layout modes as well as quick to access scale modes, the Hydrasynth Desktop / Rack is easy to make music on.
The Hydrasynth Desktop / Rack comes with rack ears so that you can mount it in a standard 19" rack.
Polytouch™ pads
One problem with many desktop or rack synths is that you usually have to connect them to an external controller to play them. The idea behind having a rack or desktop unit you can put anywhere is that it is out of the way. This is fine until you want to start doing some sound editing or adjusting it in real-time. Then you want a way to play it.
We have included 24 polyphonic pressure sensitive pads that allow you to actually play the synth. With multiple pad layouts to choose from as well as multiple scales, playing the Hydrasynth Desktop is its own musical experience.
Oscillators
The tone generation capability is the heart of any synthesizer.
The 3 oscillators allow you to choose from a selection of 219 single cycle waveforms.
Wavemorphing is a feature usually found on synths with preset wavetables. Creating user wavetables is arduous or downright impossible. Unlike most wavetable synths, our oscillators 1 & 2 have our WAVELIST mode. This mode allows you to pick and choose 8 waves, from our bank of 219, arrange them in the order you want, and then morph from one to another.
mutators
Oscillators 1 & 2 are routed into our MUTATORS. The Mutators allow you to modulate, bend and sculpt the sound in new
(and old) ways.
Each MUTANT allows you to choose from the following processes:
FM-Linear - for making classic FM sounds. Choose multiple FM sources, including external inputs.
Wavestack™ - creates 5 copies of the incoming sound and allows you to set a detune amount.
Hard Sync - This gives you those classic hard sync sounds. Try hard syncing a morphing wavetable for some fun.
Pulse Width - This will pulse width modulate ANY input sound.
PW - Squeeze - This is a different form of pulse width mod that creates a smoother sound.
PW-ASM - this mode divides the incoming wave into 8 slices and allows you to set how much pulse width mod will happen in each section.
Harmonic Sweep - this will sweep the harmonics of the incoming sound.
PhazDiff - this takes the input signal, shifts the phase and then creates a difference result with the original signal
The Mutants can also generate its own waveforms in both FM and Sync modes so that you do not have use another oscillator... Of course, the routing is flexible so you can choose the other oscillators as mod sources if you like.
Mixer/ filter routing
The 3 Oscillators are fed into a mixer along with the Noise generator and Ring Modulator.
The Mixer allows you to mix levels as well as pan the input source.
There is a balance control that allows you to choose how much signal of each source is routed to filters1 and 2.
The filters can be set to be parallel or series for ultimate flexibility.
filters
If oscillators and tone generators are the heart of a synthesizer, the filters are the soul.
The Hydrasynth has two filters that can be configured in series or parallel.
The first filter has 16 different filter models, giving you multiple options for tailoring your sound.
The second filter is a 12db per octave has a continuous sweep from either low pass > bandpass >high pass or low pass > notch > high pass, similar to the way the classic SEM filter worked.
LFO's
5 Low-Frequency Oscillators…YES, 5.
Much like our sound engine, the LFO’s are not ordinary by any means.
The Hydrasynth LFO’s feature a STEP mode that allows you to create patterns with up to 64 steps. Having 5 mini step sequencers gives you an amazing amount of possibilities for further shaping your sound.
Of course, there are also 10 standard waveforms to choose from.
The LFO's all have delay, fade in, 3 triggering modes, smoothing, start phase, one-shot mode so that they can act as envelopes and BPM sync.
envelopes
5 DAHDSR Envelopes……YES 5.
An advanced sound engine needs plenty of modulation sources. Our 6 stage envelopes feature Delay, Attack, Hold, Decay, Sustain and Release stages.
The time settings for the stage can be set in seconds or in time divisions, giving you envelopes that play in sync to your song.
You can also loop the envelopes to create LFO’s whose shape can be voltage controlled in the modulation matrix.
The envelopes have the added ability to be triggered from multiple sources as of the 1.5 update.
MODULATION MATRIX
The modulation capabilities on the Hydrasynth are endless.
With 32 user definable modulation routings, you will have plenty of ways to use the 29 modulation sources and 155
modulation destinations.
Almost everything in the synth engine can be a modulation destination including the effects and arpeggiator.
The Modulation matrix points themselves can also become modulation destinations.
Modulation sources & destinations include the CV Mod In & Out jacks as well as MIDI CC’s.
ARPEGGIATOR
The arpeggiator allows for standard note arpeggiations but also has a phrase arpeggio built-in. Parameters like RATCHET and CHANCE will generate other rhythmic patterns with some randomness to add life and spontaneity to your performance.
You can also modulate most of the parameters in the arpeggiator so imagine using LFO’s, Envelopes, Polyphonic Aftertouch or the Ribbon controller to modify your arpeggios in real time.
CV/GATE - MIDI - USB
There is the standard MIDI and USB/MIDI interfaces on the synth but we go deeper and allow the use of CV/GATE interfaces for connecting to the modular world.
It supports the standard voltages for Eurorack modulars, the 1.2V per octave Buchla standard, as well as some of the Japanese Volts>HZ products. The MOD in and outs allow for modulation from DC to full audio ranges, expanding your modulation capabilities.
Main Controls
The Main system controls are where you navigate your patches, configure system settings and see parameters like the envelopes, waveforms, filters in the OLED screen.
Init and Random buttons will allow you to initialize or randomize a complete patch or specific modules with a press & hold + module select button.
Pressing the HOME button returns you to navigating patches in a simple and easy way.
master controls
The Master Control section is where all parameter editing, patch naming, and Macro performing is done.
Using OLED screens, high-resolution encoders with LED rings, and 8 buttons, this section is designed to give you good feedback on what is going on.
The VOICE parameters give you access to play modes, analog feel, voice panning and many other features.
macros
The patch MACROS are designed to allow the user deep control over the engine in live performance.
The 8 assignable encoders and buttons can each be routed to 8 destinations. Complete sound transformations can take place with the press of a button or turn of a knob.
patches
The Hydrasynth comes with 5 banks of 128 patches in total. We hired some of the best patch designers around to create the 256 factory patches.
Finding the patch you want and searching the library is made easy with our BROWSER. Our PC/MAC based Patch Manager plug-in also allows easy moving of patches to create your favorite order as well as load in new patch libraries in the future.
effects
The effects chain goes beyond the typical ones found in other synths. Pre-effects and post-effects give you some unique ways to process your sound.
The delays and reverbs were modeled on some of the most popular effects on the market.
The effects are the perfect way to complete your sound, in the box.
لطلب شراء المنتج و الشحن اتصل بنا على الارقام التالية
☎01006237502
☎01227545903
☎01127214405
☎01095518233
✅ضمان ضد عيوب الصناعه
لو حابب تعرف أكتر عن المنتجات أو تشوف أكتر تقدر تزور موقعنا الرسمي 👇
ومن خلاله تقدر تعمل أوردر يوصلك لحد باب البيت في أسرع وقت أو تشرفنا بفرع الشركة :
217 شارع احمد زكي - المعادي ميدان فايدة كامل امام سنتر الهدي والنور
تقدر تدخل علي صفحاتنا الرسمية علي فيسبوك وتعرف أكتر عن المنتجات من خلال الروابط👇
www.facebook.com/mfmusicalinstrumentsegypt/
طرق الدفع لدينا:
متوفر دفع بالفيزا كارد و الماستر كارد مع ميزة انك تقدر تقسط اي منتج مع البنك الاهلي المصري بدون فوائد لمدة 6 شهور
و خدمة QR و المحفظة الذكية و فودافون و اورانج كاش
هدفنا: الثقة - التميز - الأبداع - العمل علي راحة العميل
Got it far enough along to be functional. Need to address some shifting issues related to the change in cassette.
Conversion performed by using wheels from Velo Orange built on Velocity rims and hubs plus a new SRAM 8-speed cassette to replace the old 7-speed RSX cassette. Also necessitated swapping out the short-reach brakes for some Tektro R556 "extra" long-reach brakes. Was a little worried about some reported flex in the arms, but with the pads about halfway down they seem adequate, even if they don't have the best modulation in the world. Put on some Col de la Vie tires that I had already from another project. Very comfortable, although the tread is a bit strange -- one imagines it's a little squirmy -- on good pavement. Eats up the potholes, expansion joints, and detritus of our battered New England urban roads nicely, though.
The Dirty Carter Electronic Sound Generating Instrument was designed by John Richards (Dirty Electronics) and Chris Carter from legendary Industrial pioneers Throbbing Gristle. It was produced for a special performance by Carter and the 25 strong Dirty Electronics Ensemble in 2010. It was originally designed as a touch controlled instrument with the player's skin resistance completing the circuit. This hard wired modification by A.S.M.O. gives more control and predictability by wiring all to the touch contacts to pots and switches. An additional low pass resonant filter has been added, LFO and an external CV socket for filter modulation.
The case is made of stained ply and the front panel is covered with black leatherette.
Envelope generated by direct PWM synthesis on an Arduino. The beginning of this envelope is a 32-step exponential attack and the end is a 64-step exponential decay. The envelope is pre-computed using a small C program on a Linux machine, then stored in 256 bytes of Flash memory (ROM) in the Arduino's processor.
Here's some spec's on this sweet system. It's a "Matrix" system, meaning that it has the ability to change all of it's routings on every preset.
Instead of being tied to one signal flow you can have any signal flow you want, when you want. Which is pretty handy for score music composer & guitar instrumental musician who has to constantly change the signal flow.
The switcher has a software interface that allows you to create an icon for each device and it's corresponding input(s) & Output(s), then using the mouse, connect the rig you want to have at that moment with no extra devices connected to the signal path for the cleanest path possible from pick ups to speakers.
A matrix switcher has 16x Inputs & 16x Outputs, so we decided to put 5 switchers in this system, connected them to each other & bunch of other cool gear. Each switcher has a "Group" responsibility:
1. "Master" - Magnetic & Piezo Inputs + 4x Amplifiers + 1 Axe FX ("Front End" of 4 Wire Config) + Multiple Connections to the other Switchers
2. "Harmonics" - Octave, Fuzz & Overdrive devices.
3. "Dynamics" - Compressors, EQ's Filters, Synthesizers.
4. "Modulations" - Chorus, Phaser, Flanger, UniVibe, & Tremolo.
5. "Time" - Delays & Reverbs + Axe FX ("Back End") for Reverb, Delay & Looper.
Any order & combination of series & parallel is possible, the possibilities for signal routings are only limited by the player's imagination...
Copyright by FrankBonn - Photographer ArtPictures © 2012 Contact via email: gamesearch.info@googlemail.com
Another view from our studio. We used RSF synth and the modular system : (x3) Exp I ; (x2) Exp II ; (x2) Programmer ; (x1) KM-8 mixer.
Music :
soundcloud.com/nightbirds-electronic
soundcloud.com/nightbirds-past-records
Vidéo :
Group 1_
Cynthia Castillo, Moises Talavera, Amir Hanna, Guillermo Perez, Osvaldo Andrade
Networked Fabrication for Urban Provocations.
Shifting Paradigms from Mass Production to Mass Customization
Computational architecture and design course
Conventional construction methods all depart from the basic premises of mass production: standardization, modulation and a production line. What these systems developed during the last two centuries fail to take into account are the evolutionary leaps and bounds the manufacturing industry has taken over the last decades. With the introduction of CNC technologies and rapid prototyping machines have altered the paradigms of fabrication forever. It is due to these new tools that it is now possible to create (n) amount of completely unique and different pieces with the same amount of energy and material that is required to create (n) identical pieces. The possibilities for implementation of new forms, textures, materials and languages are infinite due to the versatility that these new tools offer a growing network of architects, designers, fabricators that are integrating them into their professional practices to generate unique and precise objects that respond to countless data and real-life conditions.
Instructors:
Monika Wittig [ LaN, IaaC ]
Shane Salisbury [ LaN, IaaC ]
Filippo Moroni [ SOLIDO, Politecnico di Milano ]
MS Josh Updyke [ Advanced Manufacturing Institute, KSU, Protei ]
Aaron Gutiérrez Cortes [ Amorphica ]
The Dirty Carter Electronic Sound Generating Instrument was designed by John Richards (Dirty Electronics) and Chris Carter from legendary Industrial pioneers Throbbing Gristle. It was produced for a special performance by Carter and the 25 strong Dirty Electronics Ensemble in 2010. It was originally designed as a touch controlled instrument with the player's skin resistance completing the circuit. This hard wired modification by A.S.M.O. gives more control and predictability by wiring all to the touch contacts to pots and switches. An additional low pass resonant filter has been added, LFO and an external CV socket for filter modulation.
The case is made of stained ply and the front panel is covered with black leatherette.
Orange Juice Drive is in a classical RAT type circuit and sounding topolgy. We add extra switch for select between symmetric or asymmetric clipping. Not operable with battery.
Image shows placement of a single front loaded primary transmit coil running across a 50MHz DDS (Direct-Digital-Synthesiser). The DDS includes full Freq-Phase modulation control for both power and data transfer. On-board circuitry also includes real time phase and magnitude monitoring of primary coil voltage and current waveforms allowing full monitoring of resulting transformer impedance and power coupling.
A single coil driver was included as a fallback option after requirements changes mandating direct wire galvanic coupling of signals into the eye via a percutaneous plug.
Advanced eye-tracking coil driver functions were subsequently removed from future designs with eye tracking then reverting to the use of mirrors and FPGA driven image segmentation ;-(
Sarah Perkins | Springfield MO
"Pierced Container" (2010)
Sterling, copper, enamel
As a maker of hollowware, I use properties of the metal: the plasticity, the permanence and the dimensionality. As an enameler, I use properties of the glass: the preciousness, the surface qualities and the color. In my work these properties function together to make a whole, with the two materials complementing and completing each other, rather than one being visually more important than the other.
My work reflects my emotional response to my environment, often referring to landscape, body part or natural object. Some of the forms are based directly on plants, fruits, rock formations and other natural objects. The colors and enamel imagery are derived from natural objects as well because I find the natural modulations of color, texture and surface very appealing and very intimate.
Manchester Cathedral.
St Mary Window, 1980.
By Antony Hollaway (1928-2000).
In 1963 the stained glass designer and craftsman Tony Hollaway was introduced to the Manchester architect, Harry Fairhurst. Eight years later, after they had worked together on commissions in Cheshire and Liverpool, Fairhurst sought Tony's advice about a plan for five large stained-glass windows in Manchester Cathedral.
Thus was Tony asked to design and make the first window, the St George in the inner south-west aisle. It was completed in 1973. Further windows followed in 1976 and 1980 and the final window, Revelation was installed in 1995.
Detail: The St Mary Window. Designed by Antony Hollaway, 1980. (This is in the Tower.)
The circle, which dominates the window, is the ancient Christian symbol of perfection. It is marred by the death of Jesus in the form of a shart of leight or the sword. This is a direct reference to the prohecy of Simeon to the Blessed Virgin at the time of the Presentation of Jesus in the Temple. (“A sword shall piee through your own Soul also”. Luke 2: 35).
This destoryed the perfection of the circle which is compensated for visually the the arcs of red and yellow. “And there appeared a great wonder in Heaven: a women clother with the sun, the moon under her feet …” (Revelation 12:1). These radii restore the symmetry required for formal and design purposes.
These are seven shades of blue within the circle, blue being a colour traditionally associated with St Mary the Virgin. The circle contains a serpent. This is a multiple image best understood under the following headings:
The circle placed upon these blocks of colour are letter forms both upper and lower case which are essentially to create a pattern. However, they may be re-assembled to read verses from the Magnificate: left to right. The act of re-assembling the letters is intended to concentrate the mine on the text which would not necessarily result from ‘easy reading’.
The above details are intended to present:
1. A suitable light modulation for this part of the building.
2. A relationship with the two adjoining windows.
3. A monumentality and dignity appropriate to the Architecture and to the special place of this window in the Scheme, and of the Virgin Mary among the Patron Saints of the Cathedral.
All the teaching elements of the window are subordinate to the formal design requirements expressed in (3).
The spillway of the water reservoir "Lacul Morii" (Mill's Lake) was commissioned in 1986. The reservoir is the largest lake in Bucharest, with an area of 246 ha. It was built for flood protection and for flow modulation of Dambovita river. Making a lake near an urban area required decommissioning of existing uses, including demolition and decommissioning of a church.
Connected Vehicle SafetyCars that look out for each other
With a little warning, many traffic accidents can be avoided altogether. Enabling cars and scooters to communicate and work together may be the first step to avoid collisions and other incidents. To do this, fast and reliable communication amongst vehicles is critical, even on crowded city streets. Intel Labs, through the Intel Collaborative Research Institute for Connected Context Computing, is exploring visible light from tail lights to support high-speed data transmission over the short distances between vehicles. The technology uses direct modulation of LED tail lights to encode data in the visible spectrum, while maintaining a constant ambient lighting state. At almost no
The Dirty Carter Electronic Sound Generating Instrument was designed by John Richards (Dirty Electronics) and Chris Carter from legendary Industrial pioneers Throbbing Gristle. It was produced for a special performance by Carter and the 25 strong Dirty Electronics Ensemble in 2010. It was originally designed as a touch controlled instrument with the player's skin resistance completing the circuit. This hard wired modification by A.S.M.O. gives more control and predictability by wiring all to the touch contacts to pots and switches. An additional low pass resonant filter has been added, LFO and an external CV socket for filter modulation.
The case is made of stained ply and the front panel is covered with black leatherette.
El edificio de la Municipalidad de Santiago es la sede de la Ilustre Municipalidad de Santiago. Se encuentra en el costado norte de la Plaza de Armas, en la esquina de la calle Monjitas con el paseo 21 de Mayo, a un costado del antiguo Palacio de la Real Audiencia que hoy alberga al Museo Histórico Nacional.
Este solar fue destinado desde la fundación de Santiago a albergar un edificio público, siendo ocupado originalmente por el cabildo de la ciudad y la antigua cárcel colonial. Un primer edificio fue construido entre 1578 y 1647. En 1679 el edificio fue demolido y más tarde, entre 1785 y 1790, fue construido un segundo edificio por el arquitecto italiano Joaquín Toesca, ahora con estilos neoclasicistas.
La fachada tiene una modulación neoclásica, arcos de medio punto, balcón corrido y vanos rectangulares. Antiguamente en el eje del pórtico se elevaba una torre. La transformación posterior le dio un sello neoclásico con elementos de renacimiento italiano, un plomo nuevo marca el acceso como cuerpo central, recorriendo un balcón, conteniendo éste, tres grandes vanos enmarcados en pilastras. La planta se desarrolla en dos niveles, rodeando un hall vidriado, y un subterráneo abovedado, ocupa parte de la planta bajo nivel
Un incendio en 1891 obligó a una reconstrucción realizada por el arquitecto Eugène Joannon. El tercer edificio del solar –que se conserva hasta la actualidad fue inaugurado en 1895 y oficialmente declarado como sede de la administración comunal. En el año 1976 fue declarado Monumento Histórico.
----------------------------------------------------------------------------------------
The Santiago Municipality building is the headquarters of the Illustrious Municipality of Santiago. It is located on the north side of the Plaza de Armas, on the corner of Monjitas Street and Paseo 21 de Mayo, next to the old Palace of the Royal Court that today houses the National Historical Museum.
Since the founding of Santiago, this site was intended to house a public building, originally occupied by the city council and the old colonial prison. A first building was built between 1578 and 1647. In 1679 the building was demolished and later, between 1785 and 1790, a second building was built by the Italian architect Joaquín Toesca, now with neoclassicist styles.
The façade has a neoclassical modulation, semicircular arches, a continuous balcony and rectangular openings. Formerly, a tower stood on the axis of the portico. The subsequent transformation gave it a neoclassical seal with Italian Renaissance elements, a new lead marks the access as a central body, running along a balcony, which contains three large openings framed in pilasters. The floor plan is developed on two levels, surrounding a glazed hall, and a vaulted basement, occupying part of the ground floor.
A fire in 1891 forced a reconstruction by the architect Eugène Joannon. The third building on the site – which is preserved to this day – was inaugurated in 1895 and officially declared the headquarters of the communal administration. In 1976 it was declared a Historical Monument.
about 0 to 100% duty cycle, up to 4kW (if used with not included heat-sinks), about 28kHz pulse width modulation frequency (PWM)
Stereo Viewer for all my photos: jongames.com/stereophoto/