View allAll Photos Tagged Sensors,
With no small particles in the air, the IR beam goes straight into the wall of the housing. The wall is black and absorbs a great deal of the radiation. The little fins might be angled in such a way that the reflected radiation bounces around many times, which further attenuates it. Ideally nothing ever hits the sensor. The main purpose of this construction is to allow smoke-carrying air penetrate the walls, but keep ambient light out.
When tiny smoke particles are present in the center of the sensor, they scatter some of the IR light towards the sensor. You hear a very load beep.
Mutsuko Hatano, Professor, Tokyo Institute of Technology, Japan during the session "Diamond Sensors.Explore" at the World Economic Forum - AMNC 17, Annual Meeting of the New Champions in Dalian, People's Republic of China 2017. Copyright by World Economic Forum / Ciaran McCrickard
This was broken when the tyre fitter replaced the tyre on my Hyundai I40.
The connections on the left are I believe for the 3V Lithium coin cell, but I'm not sure what the other connection is for ...
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
1986 Fender Stratocaster with Fender Lace Sensor Pickups
Fender 1986 USA Strat Original & Case
Fender 1986 USA Stratocaster Original & Case
I added an accelerometer (tilt-sensor) in my monome. It's the ADXL-320 with -/+5g sensor:
www.analog.com/en/mems-and-sensors/imems-accelerometers/a...
It was glued to a small piece of rubber on top of the chip. Works like a charm.
Line array sensor 512 pixels. For a new detetor to capture flying moths at night. Film is ready to make the PCBs. The aim is to build a tunnel with laser detection for flying moths at night.
The line sensor effective lenght is 64mm as detector. The exposure is done with a 650 nm laser line.
I installed this sensor connected to a buzzer to warn me when the water level on the Landy becomes low. Simple but effective.
Andrea L. Myers, graduate student in food science, picks blackberries with sensors on silicone finger sleeves to determine the amount of force required to pick the delicate berry without damaging it for post-harvest storage. The research was awarded by the American Society for Horticultural Science. (U of A System Division of Agriculture photo)
This guy sits on top of the Red Compound. I had to take a seprate picture for this, as it would have stuck up over the top of my backdrop if it were still atached.
Under färd varnar Blind Sport Sensor om eventuella fordon i den så kallade döda vinkeln. Två radarsensorer registrerar området bakom bilen och om systemet upptäcker en bil indikeras detta genom LED-indikering i ytterbackspeglarna. Vid kollisionsrisk sker styringrepp via ”Lane Assist”.
Shooting with a Foveon sensor DSLR is a tedious process, but the results are very interesting.
The wet rock textures have come out rather interesting.
Color book work as displayed on the shelf. There are 11 blank color tablet pages in the book with 11 colored pencils corresponding to the colors in Color Box 2.
Incredibly tiny photo-etch parts attached to three of the four landing struts. The sensor probes on the landing pads were locked in place using these mechanisms prior to deployment.
The increasing miniaturization of assemblies demands the smallest possible yet still high-performance components. Balluff’s new line of miniature sensors meet these requirements. With small dimensions and top performance, they offer a great degree of freedom in design and make possible considerably more applications.
Miniature sensors are available from Balluff in all operating principles: as inductive, photoelectric, magnetic, capacitive, and ultrasonic. Available for each sensor technology are compact inductive couplers, space-saving I/O modules and RFID in miniature versions.
The extensive Balluff product line includes mini sensors and compact connection technology which are ideally suited for factory automation – especially for robotics, handling, and production lines. Particularly in robotics, on production lines or in handling applications, low weight is a key requirement for being able to achieve fast cycle times. Another advantage is the reduced space requirement, which increases flexibility in a tightly packed machine compartment. Balluff mini sensors guarantee high precision and reliability.
The shortest inductive M12 sensor in the world – with a length of 12 or 17 mm (can be mounted flush or non flush) – is included in Balluff’s Mini product line. It’s so small that it can be integrated in, among other places, extremely compact linear slides, valves, and actuators.
Learn more at: www.balluff.us/minis
Image of my sensor needing a good cleaning (see the dirty spot on the left). The green color soesn't indicate anything, just that I did'nt white balance before this.
To obtain such an image:
- Go to maximum aperture (f.22 or f.30)
- Adjust speed and take a white surface shot (long exposure is not a problem, if you move the camera when taking the image it avoid confusion between the white surface dirt and sensor dirt).
- Apply an auto-level on the shot, here is the result.
The the sensor after cleaning.
Sony claims that the camera can take photos in the dark. Not quite but still pretty cool. I could hand-hold these long exposures. The CCD sensor is amazing.
Precision Combo Wheel Sensor Guard and Electric Brake Assist Guard for 2015-17 F150. Pictures courtesy of Precision Truck accessories.
Holes in foam have been made and sensor circuit board partially soldered. Just trying out the rough layout of everything, to make sure it seems reasonable.
Sensorkule fra Heimdall Power monteres på kraftlinje i regionalnettet på Jæren hos Lyse Elnett.
Montører fra Lyse monterer sensorkulen for første gang.
The Singing Urinal aka Interactive Urinal. A collaboration between the Spunkflakes and O-Rama Media. Natalie Hunter, Simon Grosser, Henry Johnson, Shaun McDermott, Paul Neesham & Dan Salmon. ©Spunkflakes. All rights reserved.