1:72 IAMI (Iranian Aircraft Manufacturing Industries) HESA-2091 ‘Tiztak’ (modified Bell AH-1J International); ‘13-6211’ of the Iranian Army Aviation Force (IAAF); Zahedan (South-Eastern Iran), 2013 (What-if/cross-bashed Fujimi kit) - WiP
Painting and markings:
Finding a suitable paint scheme was not easy. A conservative choice would have been an early mid-stone/earth scheme or a tri-color scheme consisting of sand, earth and dark green. However, while doing WWW research I came across some more exotic and contemporary specimen, carrying a kind of leopard-esque mottle scheme or even a “high resolution” fractal/digital cammo consisting of three shades of beige/brown/grey – even though I am not certain if the latter was a “real” camouflage for operational helicopters or just a “show and shine” propaganda livery?
Re-creating the latter from scratch would have been prohibitively complex, because the pixelized mottles were really fine, maybe just 2” wide each in real life. But I used this scheme as an inspiration for a simplified variant, also kept in three shades of brown, even though the result was a kind of compromise due to the limited material options to create it.
The base became an overall coat with Tamiya XF-57 (Buff), plus very light grey (RAL 7035; Humbrol 196) undersides. A light black ink washing was applied, and panels were post-shaded to create a more vivid surface.
Then came the pixelized mottles in two contrast colors: first came a layer in RAL 1015 (Hellelfenbein/Light Ivory) and then a second in RAL 8011 (Nussbraun/Nut Brown) in a 1:1 ratio, slightly overlapping and letting the Buff base shine through. These mottles were not painted but rather created with square bits from generic decal stripe material in various widths from TL Modellbau. While not as sophisticated as the original camouflage, effect and look are quite similar, and add to the unique look of this HESA-2091(-ish) model. And even though I was sceptical, esp. because of the reddish Nussbraun, the blurring effect of the scheme is surprisingly good – esp. when you put the model in front of a dry mountain background! I’ll keep the concept in the back of my head for further what-if models. All those single pixels were a lot of work, but the result looks really good.
Another detail from many real late Iranian Cobras was taken over, too: a black tail rotor drive shaft cover that extends up onto the fin’s leading edge – probably a measure to hide exhaust soot stains on the tail boom? A black anti-glare panel was added in front of the windscreen, too, and the rotor blades became medium grey (Humbrol 165, Medium Sea Grey) except for the main rotor blades’ undersides, which became black. The cockpit interior was uniformly painted in a very dark grey (Revell 06, Anthracite) and the pilots received khaki jumpsuits and modern grey and olive drab “bone domes”.
The decals were puzzled together from various sources. The Iranian roundels came from a Begemot MiG-29 sheet, registration numbers and fin flashes from an Iranian F-5. The IAAF abbreviation was created with single black 4 mm letters.
Graphite was used to weather the model, esp. the area on top of the tail boom, and the model was finally sealed with matt acrylic varnish overall.
1:72 IAMI (Iranian Aircraft Manufacturing Industries) HESA-2091 ‘Tiztak’ (modified Bell AH-1J International); ‘13-6211’ of the Iranian Army Aviation Force (IAAF); Zahedan (South-Eastern Iran), 2013 (What-if/cross-bashed Fujimi kit) - WiP
Painting and markings:
Finding a suitable paint scheme was not easy. A conservative choice would have been an early mid-stone/earth scheme or a tri-color scheme consisting of sand, earth and dark green. However, while doing WWW research I came across some more exotic and contemporary specimen, carrying a kind of leopard-esque mottle scheme or even a “high resolution” fractal/digital cammo consisting of three shades of beige/brown/grey – even though I am not certain if the latter was a “real” camouflage for operational helicopters or just a “show and shine” propaganda livery?
Re-creating the latter from scratch would have been prohibitively complex, because the pixelized mottles were really fine, maybe just 2” wide each in real life. But I used this scheme as an inspiration for a simplified variant, also kept in three shades of brown, even though the result was a kind of compromise due to the limited material options to create it.
The base became an overall coat with Tamiya XF-57 (Buff), plus very light grey (RAL 7035; Humbrol 196) undersides. A light black ink washing was applied, and panels were post-shaded to create a more vivid surface.
Then came the pixelized mottles in two contrast colors: first came a layer in RAL 1015 (Hellelfenbein/Light Ivory) and then a second in RAL 8011 (Nussbraun/Nut Brown) in a 1:1 ratio, slightly overlapping and letting the Buff base shine through. These mottles were not painted but rather created with square bits from generic decal stripe material in various widths from TL Modellbau. While not as sophisticated as the original camouflage, effect and look are quite similar, and add to the unique look of this HESA-2091(-ish) model. And even though I was sceptical, esp. because of the reddish Nussbraun, the blurring effect of the scheme is surprisingly good – esp. when you put the model in front of a dry mountain background! I’ll keep the concept in the back of my head for further what-if models. All those single pixels were a lot of work, but the result looks really good.
Another detail from many real late Iranian Cobras was taken over, too: a black tail rotor drive shaft cover that extends up onto the fin’s leading edge – probably a measure to hide exhaust soot stains on the tail boom? A black anti-glare panel was added in front of the windscreen, too, and the rotor blades became medium grey (Humbrol 165, Medium Sea Grey) except for the main rotor blades’ undersides, which became black. The cockpit interior was uniformly painted in a very dark grey (Revell 06, Anthracite) and the pilots received khaki jumpsuits and modern grey and olive drab “bone domes”.
The decals were puzzled together from various sources. The Iranian roundels came from a Begemot MiG-29 sheet, registration numbers and fin flashes from an Iranian F-5. The IAAF abbreviation was created with single black 4 mm letters.
Graphite was used to weather the model, esp. the area on top of the tail boom, and the model was finally sealed with matt acrylic varnish overall.